A2ThreeD · SpiritBro

SpiritBro Configurator

Set the board profile, verify a connected wand, and view its live power signature before shipment.

Not connected

Web Serial requires desktop Chrome or Edge over HTTPS or localhost.

01 · Board setup

Configuration

Select the PCB and electronics platform that match the physical board. Changes are safely applied after a reboot.

PCB revisionElectronics platform

Wand power controlAllow SpiritBro to send the platform-specific power pulse when the function button requests it.Spirit firing sound outputAvailable only for Spirit Electronics profiles.

02 · Bench test

Diagnostics

Read-only runtime data from the firmware. This does not change saved settings or drive any outputs.

Pack state—

Legacy wand state—

Profile state—

Profile candidate—

INA219—

Function buttonReleased

Music ModeOff

Profile state is observational only until a complete wand capture is validated. Legacy wand state remains responsible for pack control; Profile candidate shows the current four-sample confirmation dwell.

Bus voltage—

Current—

Raw power—

Wand power usageWaiting for samples

INA219 20-sample EMA · chart history remains only in this browser session.

03 · Guided wand profiling

Step 1: Off baseline

These captures remain in device RAM for this session only. They do not change pack control, saved configuration, or the selected detector.

Wand control guideTarget state for next capture · green is the required on state; amber is the control to use.

Off baseline

Required onUse this controlNot active

This guide follows the selected profiling phase. The current firmware does not expose raw physical switch positions to the browser.

What to do now

Turn the lower-right power switch off. Leave the wand still.
Click Prepare state.
After setting the wand and waiting for it to settle, click Begin sampling.

The wand powers itself off after about 30 seconds of idle time. Each timed capture is shorter than that, but complete the prompt promptly. If the wand shuts down, restart from the matching on/idle or activation step.

Timed captures ensure the minimum sample count. Activation and firing-press traces are retained as learned leading indicators; their stable bands remain independently captured.